Sealey VS8622 Instrukcja Użytkownika Pobierz pdf (Strona 27)

........ Inspect Brake Air .... .

1/1

1. This test serves to

ensure that no air

is present in this

separate hydraulic

circuit.

2. [Y] =Con. [N] =Return

3) Follow onscreen instructions to finish the first phase of operation:

- Pressure reservoir: check pretension pressure.

- Actuation takes about 30s.

4) Press Y button or gently actuate and then release the brake pedal

to continue.

 If you do not wish to continue, press N button to exit and a

“User Aborted!” message comes up.

 You can exit the air inspection service at any phase of the

operation with N button.

5) Wait a few seconds while the device is communicating with the

vehicle. And follow onscreen instructions to finish the second

phase of operation:

- The brake system pressure reservoir is OK.

- Check fill status of rear wheel brake circuits.

6) Press Y button or gently actuate and then release the brake pedal

as instructed to continue.

7) Wait a few seconds while the device is communicating with the

vehicle. And follow onscreen instructions to finish the third phase

of operation:

- Brake system fill status is OK.

- Check fill status of pedal travel simulator.

8) Press Y button or gently actuate and then release the brake pedal

as instructed to continue.

9) Use UP/DOWN button to view onscreen prompts

........ Inspect Brake Air .... .

1/2

1. Increase brake

pressure slowly and

evenly.

2. Brake pressure must

not rise beyond the

specified range!

VS8622_1.03_12/03/09

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Brak uwag

Sealey VS8622 Instrukcja Użytkownika Strona 27